Mitsubishi RS232/485/LAN Serial Communication Control Manual de usuario descargar pdf (Pagina 11)

5. eVCOM configuration

And configure it.

(1) The Gateway address is the IP address where you can reach the eWON (either

by your LAN network, either by a Direct PPP connection or either through

Talk2M).

If your eWON is on your LAN network, you will use its LAN address, by default it's

10.0.0.53.

If your eWON is called with a direct PPP connection, you will use its PPP address

202.0.0.240.

If your eWON is called through Talk2M, you will use its VPN address

(like 10.8.x.x).

(2) The Gateway port must match the port in the eWON VCOM configuration.

(3) The Communication mode must match the mode in the eWON VCOM

configuration page (RAWTCP in our example).

(4) Validate the configuration with the Update button.

(5) After the configuration, you must use the Enable Port button to activate the

Virtual Port.

eVCOM (Standard serial communications) Page 11/29

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Sin comentarios

Mitsubishi RS232/485/LAN Serial Communication Control Manual de usuario Pagina 11