Mitsubishi Q62DAN Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
3 - 14 3 - 14
MELSEC-Q
3 OUTPUT MODULE SPECIFICATIONS
3.14 QY80-TS Transistor Output Module (Source Type)
This module is a spring clamp terminal block type and an output module that has
indicators for checking the insertion state of wire.
Transistor Output Module (Source Type) Type
Specifications
QY80-TS Appearance
Number of output points 16 points
Isolation method Photocoupler
Rated load voltage 12-24VDC (+20/-15%)
Maximum load current 0.5A/point, 4A/common
Maximum inrush current 4A, 10ms or less
Leakage current at OFF 0.1mA or less
Maximum voltage drop at ON 0.2VDC (TYP.) 0.5A, 0.3VDC (MAX.) 0.5A
OFF to ON 1ms or less
Response time
ON to OFF 1ms or less (rated load, resistive load)
Surge suppressor Zener diode
Fuse 6.7A (unchangeable) (fuse blow capacity: 50A)
Fuse blow indication Yes (When fuse blows, LED indicates it and signal is output to CPU) 1
Voltage 12-24VDC (+20/-15%) (ripple ratio within 5%) External supply
power
Current 20mA (at 24VDC)
Dielectric withstand voltage 560VAC rms/3 cycles (altitude 2000m (6557.38ft.))
Insulation resistance 10M or more by insulation resistance tester
By noise simulator of 500Vp-p noise voltage, 1 s noise width
and 25 to 60Hz noise frequency
Noise immunity
First transient noise IEC61000-4-4: 1kV
Protection of degree IP2X
Common terminal arrangement 16 points/common (common terminal: TB17)
Number of I/O points 16 (I/O allocation is set as a 16-points output module)
Operation indicator ON indication (LED)
External connections Two piece Spring clamp terminal block
Applicable wire size
0.3 to 2.0mm
2
core (AWG22 to 15)
Applicable crimping terminal Refer to section 9.1
5VDC internal current
consumption
80mA (TYP. all points ON)
Weight 0.17kg
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
18
17
0
8
1
9
2
A
3
B
4
C
5
D
6
E
7
F
QY80-TS
FUSE
11
1: Fuse disconnection is not detected when the external power supply is OFF.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 143 144

Comentarios a estos manuales

Sin comentarios